Dorex DX2 FC Manual de instruções de instalação - Página 8

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema de abertura de portas Dorex DX2 FC. Dorex DX2 FC 12 páginas.

10. INSTALL ROD SIDE SCREWS

Adjustment Screw

1. Deadbolt should be extended.

2. Pass side screws (1) through support bracket, connector

and retractor, then tighten the screw.

3. Fasten screws (2). through support bracket on retractor.

Note: Fasten screws (2), then adjust deadbolt before tighten them

12. INSTALL BOTTOM STRIKE

Mark fand prepare floor according to the type of strike and fastener

furnished as per illustrations below. Thresholds will have to be modified

to accommodate strike. For floor strikes not shown, please refer to the

installation instructions for those stikes.

See Page 10 for details.

Pullman Latch

(Default)

Round Bottom Latch

(Option)

Retractor

Support

Bracket

Connector

Screws

DXAS227

DXAS225

DXAS226

11. HANG DOOR AND INSTALL TOP STRIKE &

RELEASE PLUNGER

See "FRAME PREPARATION" on page 9 for cut-out and holes.

After preparing, install top strike into door frame and mount

with two(2) strike screws.

Shim (if using)

Release Plunger

Plunger Screws

See "FRAME PREPARATION" on page 9 for holes.

After preparing, install release plunger wih two (2) plunger

screws. Ensure hole in door aligns with plunger pin (see

page 6.)

13. ADJUST RODS AND INSTALL CASE COVER

1.For Rod Adjustments SEE PAGE 9

Cover

Cover Screws

2. Attach cover to center case with two(2) center case screws.

8 / 12

Screws

DXAS216 Strike

Strike