Dorex DX2 PV Manual de instruções de instalação - Página 9

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema de abertura de portas Dorex DX2 PV. Dorex DX2 PV 12 páginas.

11. SECURE TWO (2) SIDE SCREWS

Fasten two additional side screws through the second holes

in the connecting bar and in the retractor for both the bottom

and top connecting bars.

12. ADJUST BOTTOM ROD WITH DOOR OPEN

(TOP LATCH RETRACTED)

1. Depress exit device push bar and ensure that the bottom

latch is retracted and stays retracted after the door is

opened. Adjust the retractor screw if needed.

2. Close the door and ensure that the bottom latch engages

in the bottom strike. Adjust strike on the floor or threshold

to ensure proper latchbolt/strike engagement.

3. Open and close door few times and verify that both

latches are engaged and the latch bolt is deadlocked.

4. Secure side screws firmly when final adjustments are

completed.

Connecting Bar

Tighten Four(4)

Side Screws

Second

Side

Screws

Open

13. INSTALL ROD GUIDES AND COVERS

WITH SCREWS

Latch Cover Screws

Latch Cover

Rod Guide

Rod Guide Screws

Cover

Screws

1. Position rod guides midway between the latches and the

centercase, centered on rods. Mark mounting holes, then

drill pilot hole or drill and tap for fasteners. Secure rod

guides with screws.

2. Install covers on the center case and latches and secure

with screws.

9 / 12

Install rod guide

at mid point

between latches

and center case.