Canon 7230 Especificações técnicas - Página 15
Procurar online ou descarregar pdf Especificações técnicas para Projetor Canon 7230. Canon 7230 18 páginas. Serial functional specification
Imprimir página
SERIAL FUNCTIONAL SPECIFICATION
8. Status Read Command
8.1. Format
1. A PC issues commands fin format as below.
"CR" COMMAND [CR]
COMMAND: 1 character (See Status Read Command Table)
2. When a projector receives the appropriate command, it returns a character line as the
required data.
Required Data [CR]
Required Data: A character line (See Status Read Command Table)
3. When receiving data cannot be decode, the projector returns, "?" [CR].
8.2. Transfer Example
Get input mode for the projector by commands.
PC → Projector
Projector → PC
8.3. Status Read Command
Command
"CR0" [CR]
Detail
Get the projector status.
Acceptable
Response
Unacceptable
{Response Detail}
8.3.1. "00" [CR]
Status: Power ON
The image is displayed normally.
Item
Status Read Command
Command (current input mode command issue)
"C"
"R" "1" CR
"%1" [CR]
"00" = Power ON
"80" = Standby
"40" = Processing Count Down
"20" = Processing Cooling Down
"10" = Power Failure
%1
"28" = Processing cooling down due to abnormal temperature
"08" = Abnormal Temperature
"88" = Normal after recovering abnormal temperature
"02" = Cannot accept RS232C command
"24" = Processing Cooling Down for Power Save
"04" = Power Save
"?" [CR]
"1"
←―――→
Response
(A few ms--1s)
(Shows
Computer 1 is selected)
Page
CR
15/18