Canon LV-7215 Especificação - Página 22
Procurar online ou descarregar pdf Especificação para Projetor Canon LV-7215. Canon LV-7215 47 páginas. Mounting hanger for low ceilings
Também para Canon LV-7215: Especificação (22 páginas), Brochura e especificações (2 páginas), (Japonês) Manual de montagem e instalação (8 páginas)
Imprimir página
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.6.2
CF_AVDLINECOMMAND
COMMAND
"CF_AVDLINE_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical resolution value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.3
CF_AVHPOS COMMAND
COMMAND
"CF_AVHPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE horizontal position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.4
CF_AVVPOS COMMAND
COMMAND
"CF_AVVPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.5
CF_AVSERV COMMAND
COMMAND
"CF_AVSERV_%1" [CR]
%1
"RST"
Set AV horizontal/vertical resolution that is set in such as "CF_A Ｖ
DDOTS"/"CF_AＶＤＬＩＮＥ" to default setting value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
"000" [CR]
"101" [CR] ----Input-VIDEO
"000" [CR]
"101" [CR] ----Input S-VIDEO
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
22