Electra Light RGB 10W – Di-PA Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ Electra Light RGB 10W – Di-PA. Electra Light RGB 10W – Di-PA 4 páginas. Laser show system
Imprimir páginaEmergency Stop Box
This emergency stop box should
be connected well to the high
power laser projector. Keep the
key switch on, for the emergency
safety, just press the RED button.
It will control the laser projector, no
laser out put. Standard package
with 5 Meter DB9 connect cable.
Maintenance
☆ Please clean the lens regularly. Do not do it using the wet cloth or
other chemical. the clean times is depend on the using frequency
and surrounding condition. It is recommended that should be
cleaned every 20 days.
☆ Please clean the lighting surface and engine outlet regularly.
☆ Be sure that there is no flammable or explosive subject nearby. The
least distance is 0.5 meters. at the same time, keep more than
15cm between the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS Ⅲ B. It's
dangerous for observing laser. The safe minimum distance is
13cm,the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and
flammable material;
----------------- 4 -------------------
Inspection
Check for the contents in the package refer to the following
1. 10WRGB laser System: 1
2. Power cable: 1
3. User manual: 1
4. Emergency button for remote control
Technical parameters
1. Laser diode: DPSS, Green 532nm; Red 638nm; Blue 445nm
2. Power supply：AC110-240V, 50/60Hz
3. Power consumption: 200W
4. Laser power：Red 2W, Green 2W, Blue 6W
5. Scanners: high speed scanners DT40pro.
6. Control mode: Sound control/Auto/DMX/ILDA
7. Emergency button for remote control.
8. Dimensions: 425mm×380mm×420mm
9. Net weight: 25KG
10. Gross weight: 27KG (44KG with flycase)
DANGER
LASER RADIATION AVOID EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
----------------- 1 -------------------
list: