Baumer GNAMG Series Manual - Página 30

Procurar online ou descarregar pdf Manual para Acessórios Baumer GNAMG Series. Baumer GNAMG Series 41 páginas. Inclination sensor with canopen interface

Imprimir página
Baumer GNAMG Series Manual
Object 6120
Slope angle X- axis (Slope lateral)
SubIndex
Data type
Access
Default
EEPROM
Meaning
Parameters
Object 6121
Operating parameters X-axis (Slope lateral operating parameter)
SubIndex
Data type
Access
Default
EEPROM
Meaning
Parameters
Object 6122
Preset value X-axis (Slope lateral preset value)
SubIndex
Data type
Access
Default
EEPROM
Meaning
Parameters
Manual_GNAMG_CANopen_EN.doc
21.11.12
0
Integer 32
ReadOnly
No
Slope angle
Value range
Depending on the device type (measuring range) and parameter in 6000h
(resolution):
(+measuring range)/resolution ... to ... (-measuring range)/resolution
Example:
Measuring range = ±30°
Resolution = 0,001
Value range: +30000...-30000
0
Unsigned 8
ReadWrite
0h
Yes
Inversion:
Inversion enabled means reverse polarity of the X-axis.
Scaling:
Scaling enabled means calculation of slope of the X-axis as follows:
Slope X –axis = physically measured slope + differential offset X- axis + offset
X-axis
If scaling is disabled:
Slope X –axis = physically measured angle
Bit 0 = 1 inversion on
0 inversion off
Bit 1 = 1 scaling on
0 scaling off
0
Integer 32
ReadWrite
0h
Yes
Sets the actual slope of the X-axis to the required value
Value range depending on parameters in object 6000h
30/41
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany