Amphenol RLA00571-25OR Manual de montagem - Página 4
Procurar online ou descarregar pdf Manual de montagem para Cabos e conectores Amphenol RLA00571-25OR. Amphenol RLA00571-25OR 7 páginas. Assembly type connector
Imprimir página
⑴
建议使用推荐线材（型号详见步骤1-1），如果客户选用其它电缆，请联系安费诺业务，协商订制零配件
Recommended cable should be used. （See section 1-1 for details.） If you need to use customized cable, Please contact
local sales for product extensions
⑵
压接高度和拉拔力需要配合压接截面的金相分析，客户才能判断压接质量合格,端子压接需要满足压缩比要求：80-90%。
Customers need to reconfirm cross section on crimping area and pull out force test to confirm the quality of crimp process,
Terminal crimping needs to meet the compression ratio requirements: 80-90%.
⑶
横截面仅供参考，客户负责采购压接工具或刀模
Cross section shape is only for reference, all crimping tools needed are supposed to be prepared by customers.
步骤3：将压好端子的端子组件如图示装入③下盖，再盖上①上盖将接头紧固好。
Step 5: Assemble the crimped terminal assembly into the ③ lower cover as shown in the figure, then cover the ①
upper cover and secure the connector.
③
Rev.00 20210811 Document No: 8P1147
RLA 5.7mm 组装式接头安装说明 The Assembly Manual for RLA 5.7 mm assembly type Connector
按住卡扣装入
确认此处无间隙
Press the button to assemble
Make sure no gap in
this area
03-05