Amphibian Gear Smart Pack Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Instrumento de mergulho Amphibian Gear Smart Pack. Amphibian Gear Smart Pack 20 páginas.

Connection of the tank belt:

Adjustment of Smart Pack to the diver ﬁgure

Before any dive, make sure that Smart Pack is ﬁtted correctly (adjusted) to a ﬁgure

of a diver taking into account the type of suit used during diving (photo 5).

Putting the Smart Pack on your suit, adjust the Smart Pack so that its straps ﬁtted

to the waist, shoulders (but not too tight), and crotch strap does not interfere with the

movements. It must be easy to put two ﬁngers between shoulders and straps of the

Smart Pack. Adjust the D-rings and clamps into the right position.

Sequence of the adjustment when dressing the Smart Pack:

1. Waist strap – accurately place the lower edge of the harness and the waist strap

at the waist (not too high).

2. To ﬁx the waist strap and the entire harness at the right level, you need to adjust

the lower crotch strap so that it would not allow the harness to rise.

3. Adjust the width of the chest strap so that the angle between it and the shoulder

strap is around 90 degrees.

4. Only after doing the above listed actions tighten the slings that connect shoulder

straps and waist straps. The direction of force application - the lower part of the diver's

back.