Amphibian Gear Smart Pack Manual do utilizador - Página 18

Procurar online ou descarregar pdf Manual do utilizador para Instrumento de mergulho Amphibian Gear Smart Pack. Amphibian Gear Smart Pack 20 páginas.

Your BCD Smart Pack is reliable equipment that was developed to withstand many

years of diving in different challenging conditions subject to proper maintenance. Follow

the procedures described below to ensure long service life of your Smart Pack.

You should apply for periodical inspection and annual maintenance in an

authorized center of Amphibian Gear.

Before every diving, make sure that the equipment is working properly. If some

part of the Smart Pack is not working properly, DO NOT DIVE and repair Smart Pack at

the Amphibian Gear's dealer service center.

CHECK:

• Fix the Smart Pack Set on the tank and connect to the inﬂator. Check the proper

operation of the inﬂator buttons by inﬂating /deﬂating the wing with air from the tank.

• Check the inﬂator attachment for air leaks.

• Check the manual inﬂating of the wing with the help of the mouthpiece of the

inﬂator.

• Fill the wing completely with air and check for air leaks (sign of air leakage is the

systematic air bleed).

• Check the wing valve for spontaneous bleed air. In proper operating of the valve

the air is discharged with the help of the valve cord or by strong pressing on the

inﬂated wing.

• When using the weight pockets get sure that the pockets and weights are

properly fastened .

Maintenance after diving

To save your Smart Pack in the perfect state for many years do the follow our

recommendations after each dive:

• Fill the one-third of the wing with fresh water through the mouthpiece of the

inﬂator.

• Fully inﬂate the wing and then shake and rotate it wash the camera from salt

inside.

• Hold the wing "upside down" and drain all the water from inside through the

inﬂator.

• Carefully wash the outer surface of the wing and the entire Smart Pack with fresh

water.