AmpleNess S52100G Manual do utilizador - Página 14
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras AmpleNess S52100G. AmpleNess S52100G 20 páginas. Storage lithium battery
Imprimir páginabattery with the DC positive electrode of inverter by a red cable, and connect the negative
electrode of battery with the DC negative electrode of inverter by a black cable.
5.9.5 Communication wire connection
A single battery: just select the corresponding interface according to the communication
protocol of inverter.
Multiple batteries: the host and the slave batteries communicate in cascade mode, one of
them is the host, and the rest are slave batteries. Then, the corresponding port can be connected
to the host battery according to the communication protocol of inverter.
5.9.6 Start-up
Please confirm again whether all cables are correctly connected, firmly connected, and not
short circuit or reverse connection before starting up.
Please turn all battery switch buttons to "ON" .
A single battery: If the battery SOC indicator is always on and the alarm indicator is off, it
means that the battery has been started.
Multiple batteries: If all battery SOC indicators are always on and the alarm indicator is off,
it means that all batteries have been started.
Attention: please connect the inverter immediately to charge if battery power is too low and
cannot be started.
AMPLENESS Lithium Battery S52100G User Manual
12