AmpleNess S52100G Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras AmpleNess S52100G. AmpleNess S52100G 20 páginas. Storage lithium battery

Imprimir página

In the process of unpacking, please pay attention to lift and put it down gently and protect

its surface coating.

The installing person should read technical document, check the list, confirm whether

accessories are completed and intact according to Packing List at first after unpacking. If

internal packages are damaged, please check it carefully and take records.

5.8 Preparation

Please ensure the POWER buttons of all batteries are in cut-off status.



Please ensure the charging voltage of the device is within the product allowable range.



Please cut off power to all related devices.



5.9 Installation and wiring

5.9.1 Device installation

Please take reference of the way recommended by manual to place the product. All devices

must be firm during installation. Please arrange the stacked number of devices flexibly as actual

needs. Don't install batteries on sloping and unstable ground.

5.9.2 Ground wire connection

Please unscrew the screw at the ground hole on front panel, install the ground terminal on

the screw and tighten it with a screwdriver. The other end of ground wire is connected to the

nearby bracket, and the whole is connected to a reliable ground point.

5.9.3 Power cable connection

Please check the continuity of the cable, distinguish the positive and negative terminals,

and label the cables before connecting power cable. Please also check whether there is short

circuit and reverse connection after the cable connection is finished. The checking method is as

follows:

Cable continuity: please adjust to the buzzer gear of multimeter and test two ends of the

cable by a probe. If the buzzer sounds, the cable is available.

Voltage diagnosis: please adjust to the DC voltage gear of multimeter and test the

positive and negative electrode of battery by a probe. If it indicates the voltage within the

normal range, the product can be used.

5.9.4 Cables connection

A single battery: please connect the positive electrode of battery with the DC positive

electrode of inverter by a red cable, and connect the negative electrode of battery with the DC

negative electrode of inverter with a black cable.

Multiple batteries: please adopt the parallel connection method between battery and

battery or battery and inverter. At first, please connect the positive terminals of the adjacent 2

batteries respectively by a red cable, and connect the negative terminals of the adjacent 2

batteries respectively by a black cable. Second, please connect the positive electrode of

AMPLENESS Lithium Battery S52100G User Manual