Advanced MxPro 4 Manual - Página 5

Procurar online ou descarregar pdf Manual para Equipamento de gravação Advanced MxPro 4. Advanced MxPro 4 8 páginas. Shop interface unit
Também para Advanced MxPro 4: Manual (10 páginas)

Imprimir página

1.4 Internal Wiring

A 10 way single in line ribbon cable is used to

connect the input card, via the latched

header – PL1, to the 10 way latched header

on the back of the display card.

Route the cable as shown in the diagrams

opposite.

Adhesive ribbon cable clips are supplied with

the kit.

Affix these in the positions shown and clip the

ribbon cable into place to prevent undue

strain on the cable connections.

The 8-Way Input Card requires a 24VDC

Supply.

Connect the Inputs to the 24V DC AUX

Supply Output on the base card as shown in

the diagram opposite.

OBSERVE POLARITY OF CONNECTIONS.

www.advancedco.com

Figure 3

Cable

Input Card

Route the cable between the input card and the base card and

then beneath the base card along the bottom edge.

Figure 4

Cable Clips

Route the cable around the hinge and along the display plate.

Positions for the plastic cable clips are shown

Figure 5

Input Card

AUX DC Power to Input Card

Base Card

Display Card

Base Card