DPR Hyper Cub Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Brinquedo DPR Hyper Cub. DPR Hyper Cub 4 páginas. Limited edition rc version

Take the wooden motor box components and

remove the excess wood ensuring you

remove all air ventilation points on the main

motor plate.

Main motor

plate

Install the motor back plate to the back of the

motor.

WARNING - ensure you use the correct bolts

so not to damage the motor windings.

Install the motor to the main plate with four appropriate

screws. Ensure to pass the motor wires through the

plate before attaching to the motor.

Glue the three other pieces of the motor mount

together as shown in the image. Please note

that one side is longer than the other to allow

for some side thrust, at this stage it does not

make a difference which side this goes on.

Connect the ESC to the motor, its always good practice

to connect the motor and ESC together and test the

direction of rotation before installation.

Warning - always do this with no propeller attached.