Amsino PUGGLE Manual de referência rápida - Página 4
Procurar online ou descarregar pdf Manual de referência rápida para Bomba de água Amsino PUGGLE. Amsino PUGGLE 12 páginas. Enteral feeding pump
Também para Amsino PUGGLE: Configuração rápida (2 páginas)
Imprimir página
1.Placement of the tubing
1
Open the door, place the silicone loop
around the rotor and make sure the
cassette is in the right direction.
Press to secure the cassette between the
3
Tubing Priming
2 steps to launch priming:
- Press
: Prime message appears.
- Press multifunction button [
Launch prime.
2.Prime of the tubing
1
Switch on and prime the tubing
Switch on the pump by pressing
prime tubing by pressing
Disconnect patient then press
Prime tubing
4
Priming Complete
before starting
nutrition
Prime
After 1 min. 25 sec., priming is completed or
Program nutrition
after pressing the multifunction button [
Restart prime by pressing
Enteral feeding pump for ambulatory
Starting Up
black pins.
]:
and
.
to prime.
11:09
PM
11:09
PM
Disconnect
].
Patient
if needed.
Prime
2.Prime of the tubing
1
2
Switch on and prime the tubing
Guide the tubing from the cassette down to
Switch on the pump by pressing
secure into their respective slots.
prime tubing by pressing
Disconnect patient then press
Close the cover then place the adapter into
the slot.
11:09
PM
Menu
Prime tubing
before starting
nutrition
Prime
Program nutrition
2
Check tubing is correctly primed
Restart prime by pressing
or program nutrition by pressing
connect the tubing to the patient.
Prime stopped
Prime stopped
Check tubing is
Check tubing is
correctly primed
correctly primed
Restart prime
Restart prime
Program nutrition
Program nutrition
2
and
.
to prime.
11:09
PM
Disconnect
Patient
Prime
if needed
then
11:09
11:09
PM
PM
4
o