Bosch SB Series Manual de instruções - Página 22

Imprimir página

Operating the appliance

Remaining running time

display

When the programme is selected, the

remaining running time of the

programme is indicated on the digital

display )*.

The running time is determined during

the programme by the water

temperature, the number of utensils as

well as the degree of soiling and may

vary (depending on the selected

programme).

T imer programming *

T i m e r p r o g r a m m i n g

* depending on model

You can delay the start of the

programme in 1-hour steps up to

24 hours.

1. Close the door.

2. Switch on ON/OFF switch (.

3. Press button X + until the digital

display )* jumps to :

4. Press X + or – button until the

displayed time corresponds with your

requirements.

5. Press START button h, timer

programming is activated.

6. To delete timer programming, press

the X + or – button until )* :

is indicated on the digital display.

You can change your programme

selection at any time until the

programme starts.

End of programme

The programme has ended when the

value :

is indicated on the numerical

display )*.

Automatic switch off after end

of programme or interior light*

* depending on model

To save energy, the dishwasher can be

automatically switched off 1 min or 120

min after the programme ends.

The setting can be selected from :

to :

1. Close the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

4. Release both buttons.

5. Keep pressing programme

Appliance does not

switch off automatically.

The interior light 1"

comes on when the door

is opened irrespective of whether

the ON/OFF switch (

is switched on or off. When

the door is closed the light is off. If

the door is open for longer than 60

min., the light switches off

automatically. The interior light 1"

is lit only when the set value :

is selected.

Appliance switches off after 1 min.

Appliance switches off after 120

min.

and press START button h

until : ... is indicated on the digital

display.

The LED for button # flashes

and the digital display )* displays

the factory setting :

button # until the value : ... is

indicated on the numerical display

)*.

A u t o m a t i c s w i t c h o f f / i n t e r i o r l i g h t