Bosch Series 4 Manual do utilizador e instruções de instalação - Página 25

Imprimir página

Bosch Series 4 Manual do utilizador e instruções de instalação

¡ Observe any available installation instructions for the

hob.

19.4 Installation in a tall unit

Observe the installation dimensions and the installation

instructions when installing in a tall unit.

¡ To ventilate the appliance, the intermediate floors

must have a ventilation cut-out.

¡ If the tall unit has another back panel in addition to

the element back panels, this must be removed.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

19.5 Corner installation

Observe the installation dimensions and the installation

instructions when installing in a corner.

¡ To ensure that the appliance door can be opened,

you must take the minimum dimensions into consid-

eration when installing in a corner. The dimension

is dependent on the thickness of the unit front and

the handle.

19.6 Electrical connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

¡ The appliance corresponds to protection class I and

must only be operated with a protective earth con-

nection.

¡ The fuse protection must correspond to the power

rating specified on the appliance's rating plate and

to local regulations.

¡ The appliance must be disconnected from the

power supply whenever installation work is being

carried out.

¡ The appliance must only be connected using the

power cable provided.

¡ The power cable must be plugged in at the rear of

the appliance until you hear a clicking sound. A 3 m

power cable can be obtained from the after-sales

service.

¡ The power cable must only be replaced with a cable

from the original manufacturer. This is available from

after-sales service.

¡ Contact protection must be ensured during the in-

stallation.

Electrically connect the appliance with the protective

contact plug

Note: The appliance must only be connected to a pro-

tective contact socket that has been correctly installed.

Insert the plug into the protective contact socket.

▶

When the appliance is installed, the mains plug of

the power cord must be freely accessible. If free ac-

cess to the mains plug is impossible, an all-pole

isolating switch must be integrated into the perman-

ent electrical installation in accordance with the in-

stallation regulations.

Electrically connecting an appliance without a

protective contact plug

Note: Only a licensed professional may connect the ap-

pliance. Damage caused by incorrect connection is not

covered under the warranty.

An all-pole isolating switch must be integrated into the

permanent electrical installation according to the install-

ation regulations.

Identify the phase and neutral conductors in the

socket.

The appliance may be damaged if it is not connec-

ted correctly.

Connect the hob in accordance with the connection

diagram.

See the rating plate for the voltage.

Connect the wires of the mains power cable accord-

ing to the colour coding:

Green/yellow = Protective conductor

‒

Blue = Neutral conductor

‒

Brown = Phase (external conductor)

‒

19.7 Installing the appliance

Slide the appliance all the way in and centre it.

Installation instructions en