Draper BMSM Manual de instruções de utilização - Página 11
Procurar online ou descarregar pdf Manual de instruções de utilização para Ferramenta eléctrica Draper BMSM. Draper BMSM 20 páginas. Bench mounted spindle moulder
Imprimir página
ASSEMBLY
- FITTING THE ROUTER BIT GUARD (Fig.8):
- The router bit guard
using the upper and lower blade guides, attach the bit
guard by lining up the fixing holes on the fence and
guard and inserting pin
- FIXING THE REAR FENCE TO THE WORK TABLE
(Figs.9 - 13):
- Place the fully assembled rear moulded fence onto the
work table Fig.9.
- Remove the front panel by removing four cross slot
screws using a screwdriver (not supplied). Fig.10.
Note: Ensure spindle moulder is isolated from the mains
supply.
- Once the front panel has been removed, insert bolt
into the left locating hole from inside the spindle
moulder. Fig.11.
must be used when not
. Fig.8
- 10 -
FIG.8
FIG.9
FIG.10
FIG.11