Draper HG2000 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Draper HG2000. Draper HG2000 12 páginas. 2000w hot air gun

APPLICATIONS

The following instructions should only be used

as a guide as the ideal temperature should be

Fig.3

ascertained by performing a test on the

workpiece. Heating efficiency will vary

depending on the properties of the workpiece,

and the distance kept between the metal nozzle

and the workpiece.

IMPORTANT:

Please note this machine is fitted with safety

thermal overload protection. If the product,

for example, is used too close to the

workpiece - resulting in overheating, the

thermal overload protection will be

activated and stop the motor/heating of the

machine.

The hot air gun should be switched off and

disconnected from the power supply,

allowing the machine to totally cool down -

before restarting work.

Remember the nozzle will remain hot for

Fig.4

sometime - a safe storage location should be

used.

PAINT REMOVAL FROM WINDOW FRAMES Fig.4

IMPORTANT: Do not direct the hot air gun at

the glass during use as it may crack. Always

use the glass protection nozzle ✫✌ (not

supplied see optional accessories, page 9). Do

not touch the glass with the hot metal

protection nozzle. Repeat as above for paint

removal.

✫✌

HEATING AND SHAPING PLASTIC TUBING Fig.5

Fig.5

✬✌

Fit the reflector hook nozzle ✬✌ (not supplied

see optional accessories, page 9). Switch the hot

air gun on to the low heat setting (1), carefully

heat the tubing evenly moving it from side to

side.

- 7 -