Bosch 800 Series Manual de instruções de instalação - Página 10

Drain Connections

The dishwasher drain hose may be connected to the house-

hold or field drain plumbing in one of four ways. You will need

a 1¼" diameter hole in order to pass the drain hose through

the cabinet.

1 Directly under the sink dishwasher drain connection, as

shown in Figure 9.

2 Directly to a disposer dishwasher drain connection, as

shown in Figure 10.

3 To the under sink dishwasher drain connection through

an air gap, as shown in Figure 11.

4 To a disposer dishwasher drain connection through an air

gap, as shown on Figure 12.

IMPORTANT NOTES:

· If local ordinance require an air gap, install it according

to the manufacturer's instructions.

· If the dishwasher drain hose is to be connected to a

disposer dishwasher drain connection, remove the plug

from the disposer's dishwasher drain connection.

· The dishwasher drain hose must have one place along

its length that is securely attached 20" (508 mm) above

the cabinet floor.

· The drain hose length can be extended if necessary. The

maximum length of the drain hose, including the hose

leading to the air gap, is 150" (3800 mm).

Figure 8

Figure 9

Non-Metallic Tie

MIN.

20"

Figure 11

Figure 10

Non-Metallic Tie

MIN.

20"

Figure 12

Remove

plug