Bosch 800 Series Manual de utilização e cuidados - Página 30

Imprimir página

Bosch 800 Series Manual de utilização e cuidados

en-us Troubleshooting

Issue

Food remnants on dishware.

Detergent residue in the appliance Lid of the detergent dispenser is blocked by items of dishware and will not open.

Water spots on plastic parts.

Wipeable or water-soluble coatings

inside the appliance or on the

door.

There are stubborn white coatings

on the dishware, inside the

appliance or on the door.

Tea residue or lipstick marks on

dishware.

Cause and troubleshooting

Adjust the sensitivity of the sensors.

▶

→ "Sensors", Page 6

Tall narrow containers in corner areas are not rinsed out adequately.

Do not position tall narrow containers at too great an angle or in corner areas.

▶

Upper rack on right and left not set to same height.

Set the upper rack on the left and right to the same height.

▶

→ "Upper rack", Page 12

Arrange dishware in the upper rack so the tab collecting tray is not obstructed by

dishware.

→ "Loading dishware", Page 18

Items of dishware are blocking the dispenser lid.

Do not place dishware or fragrance dispensers in the tab collecting tray.

The lid of the detergent dispenser is blocked by the tab and will not open.

Position the tab in the detergent dispenser crosswise, not vertically.

▶

Tabs are used in the quick or short cycle. There is not enough time for the tab to

dissolve.

Select a more intensive Wash cycle or use Powder detergent.

▶

Detergent may lose its cleaning or dissolving ability after being stored a long time,

or the detergent is clumped together.

Change your Detergent.

▶

Droplet formation on plastic surfaces is unavoidable due to the laws of physics.

Water spots are visible after drying.

Select a more intensive program.

▶

Position dishware at an angle.

▶

→ "Loading dishware", Page 18

Use rinse aid.

▶

→ "Rinse aid", Page 15

There is detergent residue. These coatings cannot generally be removed with

chemicals.

Change your Detergent.

▶

Scrub the appliance by hand.

▶

There is detergent residue. These coatings cannot generally be removed with

chemicals.

Change your Detergent.

▶

Scrub the appliance by hand.

▶

Too little detergent is being used.

Increase the amount of detergent used or change Detergent .

▶

Selected wash cycle is too light.

Select a more intensive wash program.

▶

Adjust the sensitivity of the sensors.

▶

→ "Sensors", Page 6

Dishwashing temperature is too low.

Select a program with a higher dishwashing temperature.

▶

Too little detergent is being used or is unsuitable.

Use a suitable Detergent and follow the manufacturer's instructions for the

▶

amount to be used.

Dishware has been precleaned too intensively. Then the sensors choose a lighter

cycle. Stubborn remnants cannot be entirely removed.