Bosch 800 Series Manual de utilização e cuidados - Página 31

Imprimir página

Bosch 800 Series Manual de utilização e cuidados

Issue

Tea residue or lipstick marks on

dishware.

There are colored coatings (blue,

yellow, brown) inside the appliance

or on stainless steel dishware that

are difficult or impossible to

remove.

Plastic parts inside the appliance

are discolored.

Plastic parts are discolored.

There are removable streaks on

glasses, glassware with a metallic

appearance and silverware.

Irreversible clouding of glassware.

Cause and troubleshooting

Only remove large remnants of food and do not pre-rinse dishware.

▶

Adjust the sensitivity of the sensors.

▶

→ "Sensors", Page 6

The formation of films is due to substances contained in vegetables (cabbage,

celery, potatoes, noodles, etc.) or tap water (manganese).

Clean the appliance.

▶

You can remove coatings with Mechanical cleaning → Page 23 or a machine

cleaning product. It may not always be possible to completely remove coatings

but they are harmless to health.

The formation of films is due to metal components on silver or aluminum dishware.

Clean the appliance.

▶

You can remove coatings with Mechanical cleaning → Page 23 or a machine

cleaning product. It may not always be possible to completely remove coatings

but they are harmless to health.

Plastic parts inside the appliance may become discolored over the life of the

dishwasher.

Discoloration may come about and will not impair functioning of the appliance.

▶

Dishwashing temperature is too low.

Select a program with a higher dishwashing temperature.

▶

Dishware has been precleaned too intensively. Then the sensors choose a lighter

cycle. Stubborn remnants cannot be entirely removed.

Only remove large remnants of food and do not pre-rinse dishware.

▶

Adjust the sensitivity of the sensors.

▶

→ "Sensors", Page 6

Amount of rinse aid to be dispensed is set too high.

Set the rinse aid system to a lower setting.

▶

→ "Setting the amount of rinse aid", Page 15

No rinse aid has been added.

Add rinse aid.

▶

→ "Adding rinse aid", Page 15

There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by

dishware and will not open fully.

Arrange dishware in the upper rack so the tab collecting tray is not obstructed by

dishware.

→ "Loading dishware", Page 18

Items of dishware are blocking the dispenser lid.

Do not place dishware or fragrance dispensers in the tab collecting tray.

Dishware has been precleaned too intensively. Then the sensors choose a lighter

cycle. Stubborn remnants cannot be entirely removed.

Only remove large remnants of food and do not pre-rinse dishware.

▶

Adjust the sensitivity of the sensors.

▶

→ "Sensors", Page 6

Glasses are not dishwasher-proof, only suitable for dishwashers.

Use dishwasher-proof glasses.

▶

Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term

wear or long-term changes must be expected.

Avoid a lengthy steam phase (standing time after wash cycle ends).

▶

Use a program with a lower temperature.

▶

Use detergent with a glass protection component.

▶

Troubleshooting en-us