Draytek VigorTalk ATA Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Adaptador Draytek VigorTalk ATA. Draytek VigorTalk ATA 17 páginas.

2 Installation and Configuration

If this product is provided to you by the service provider or network

administrator, pre-configuration of network and service settings may have

been applied. You, as end-user, may be limited to access local configuration

settings. Then you should follow the installation instruction provided by

your provider.

Depending on the service policy, if end user configuration is permitted, please

follow the major instructions described below. For more detail, please refer to the

VigorTalk User's Guide.

To locally configure the VigorTalk, you should have the equipments and

information below:

1. A touch tone telephone

2. Ethernet-based Cable or DSL modem or General ADSL router, e.g. Vigor 2900

(or a router plus a Ethernet-based Cable or DSL modem will work equally)

3. An established Internet account from an Internet Service Provider (ISP), including

IP Address Subnet and Gateway Address or DHCP availability.

4. SIP Proxy Address and Registration Information from SIP Registrar (e.g. DrayTEL)

DrayTek provides two interfaces for configuration. You may need to use both for

initial installation.

DrayTek IVR(Interactive Voice Response)*

Web GUI

* Interactive Voice Response (IVR) is an automated voice system which allows caller

can navigate the function menus created by providers using their telephone keypad.

VigorTalk ATA