Draytek VigorTalk ATA Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Adaptador Draytek VigorTalk ATA. Draytek VigorTalk ATA 17 páginas.

2.1.2 With Enthernet-based Cable or DSL Modem

To use Web GUI, you need to set the IP address of your VigorTalk and PC in

the same subnet. (For example,192.168.1.1 for VigorTalk and 192.168.1.2 for

the PC)

1 Use a standard RJ-45(Ethernet) cable to connect the LAN port of

VigorTalk and the Ethernet adapter of the PC.

2 Use a standard RJ-11 (telephone) cable to connect the Phone port of

VigorTalk and the touch tone telephone.

Note: Do not connect RJ-11 (telephone) cable to the wall jack

3 Connect the power adapter (included) to the receptor of VigorTalk and

plug the other end of the power adapter to a wall outlet to power on the

unit.

4 Via the phone key pad, press "***#" to enter the VigorTalk IVR. You will

hear the welcome message.

5 Press "20#" to enter "Set Static IP". Please follow the voice instruction

to set IP Address(e.g.192.168.1.1), Subnet Mask, Gateway and

Domain Name Server. Then hang up.

For further detail of IVR, please refer to the section 2.3.

6 Set the IP address of the PC accordingly (e.g.192.168.1.2) in the

network connection configuration.

7 Open your Web browser and enter http:// (VigorTalk IP Address

192.168.1.1). Enter the default password "vigortalk" and leave the

administrator field blank in the window.

8 You may start configure VigorTalk via WebUI now. When finish, please

remember to move and connect the RJ-45(Ethernet) cable to the LAN

port of the modem, instead of the Ethernet adapter of the PC.

For more detail of Web UI, please refer to the section 2.2.

VigorTalk ATA