Anchor Economy Tent International XP Series Instruções de montagem - Página 2
Procurar online ou descarregar pdf Instruções de montagem para Tenda Anchor Economy Tent International XP Series. Anchor Economy Tent International XP Series 3 páginas. Frame tent
Imprimir páginaXP Series Frame Tent Assembly Instructions, continued
4. Lay the top over the frame pulling the web loops in the corner over the steel rod to hold
the top in place.
5. Raise your first corner and lock the upright into posi on using the provided snap bu on
in the corner weldment. Stand up leeward side (the side sheltered from the wind) first
whenever possible and as you install each upright it is advisable to a ach your top
tensioning strap and leave in a loose se ng. It is also recommended that if there is a
wind condi on of any kind you put your anchoring system in place and a ach the guys
to the anchoring system as you erect the frame.
6. From underneath the frame go to the low side. Place the center pole pin carefully
through the opening provided at the peak of the tent and place the pulley in the center
pole base over the top cable. You can now slide the center pole up the cable un it
reaches the posi on where the cables cross. Pull down slightly on the bo om cable
locking the base in posi on. At this point install the wire lock pin through the hole
provided at the bo om of the pole base to secure the base to the cables.
800-438-3226
|
TF:
EM:
|
economytent.com