Carmanah R247 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Equipamento de iluminação Carmanah R247. Carmanah R247 15 páginas. Solar led roadway light / 24-hour hazard flasher

Imprimir página

Figure 3

5. Plug the solar panel harness into the solar panel interface harness already present on

the card.

6. Place the circuit board lid onto the box (make sure open end is towards the harnesses).

Ensure the harnesses exit the box, being pinched only by the foam seal. Fasten the lid

with the supplied screws.

The Model R247 Hazard Light is now functional!

Note: If any changes are desired in the function of the light using the DIP switches, the

changes must be made while disconnected from the batteries – the unit reads the DIP switch

settings upon initial power-up.

2.6

Final Adjustments

As the Carmanah Model R247 is a solar-powered device, it is critical to position the unit in

relation to the optimum angle of the sun in order to achieve maximum solar power generation.

Note: To do this, angle the top of the main housing unit towards the equator (south if installed

in the northern hemisphere, and north if installed in the southern hemisphere) and tip it

upwards at an angle equal to your latitude plus 5 degrees.

Once you have determined the final position of the R247, tighten the set-screw in the mount

collar.

2.7

Install Bird Deterrents on the Module Housing

The small wire bird deterrents discourage birds from perching on the R247. Attach the bird

deterrents to the top panel using the holes and sheet metal screws provided.

Document number: MAN_ROAD R247 Owner's Manual 37224_vE

Owner's Manual | Model R247

Last revised: November 7, 2006