Community D SERIES Manual de instalação e operação - Página 10
Procurar online ou descarregar pdf Manual de instalação e operação para Altifalantes Community D SERIES. Community D SERIES 20 páginas.

Installation and Wiring
Installation of conduit to the back can
Required tools:
• One hammer and knockout punch tool
• One step-bit for adjusting knockout diameter (optional)
• Safety glasses, gloves and other personal safety gear are recommended
as this process involves striking metal parts and chipping away debris
around the knockouts.
1. All D SERIES loudspeaker back cans have dual-diameter knockout strain
relief fittings on each side. These fittings each measure:
• 21/32" (17mm) to accommodate 3/4" (19 mm) fittings
• 15/16" (24 mm) to accommodate 1" fittings
• Also, the top cover has a 3/4" (19 mm) knockout
2. The knockout strain relief ports are opened with a hammer and punch using
the same techniques for removing knockouts in standard electrical boxes.
A step-bit can be used to modify the diameter of the hole to accommodate
larger conduit sizes.
3. Insert appropriate fittings and tighten sufficiently for wire path concealment
and strain relief, in accordance with applicable codes.
4. You can use flexible or rigid conduit (if permitted by local electrical codes).
Conduit fitted to one side of the can
(an additional knockout strain relief on
the opposite side of the can allows the
connection wiring to be carried through to
subsequent cans)
Figure 5. Conduit for protected wiring to can
When you use conduit to bring wires to the side port(s) of the back can, you
can loosen the screws in the green plug to remove the factory-installed wires
from the internal terminal block jumpers (Figure 5), then insert wires from the
conduit(s) and tighten the screws. The rest of the wiring details are the same
as shown in Figure 4.
Figure 6. Redeploying the plug for wires entering from conduit
(Loosen clamping screws to remove/replace wires)
Page 10
(continued)
Conduit fitted to the top cover plate of the
can, which has a knockout strain relief for
this purpose
Installation and Operation Manual
D SERIES Ceiling Loudspeakers