Community D SERIES Manual de instalação e operação - Página 9

Procurar online ou descarregar pdf Manual de instalação e operação para Altifalantes Community D SERIES. Community D SERIES 20 páginas.

Installation and Wiring

Note: All electrical installation connections for loudspeaker lines are subject to

all applicable governmental building and fire codes. The selection of appropriate

electrical hardware to interface with the D SERIES loudspeaker lies solely with

the installation professional. Community recommends that an appropriately

licensed engineer, electrician, or other professional identify and select the

appropriate conduit, fittings, wire, etc. for the installation.

Internal wiring between terminal block

and plug-in connector to loudspeaker

(factory wired). Red arrows point to the

jumpers between the pairs of (+) and (-)

terminals in the highlighted area of this

image.

Connect the plug from the can (or from

the conduit wiring, see Figure 5) to this

socket on the loudspeaker assembly.

Note: It should be obvious that in these photos the loudspeaker and can are not in place

in a ceiling, but instead are arranged for photographic convenience.

D SERIES Ceiling Loudspeakers

(continued)

View of 6.5" loudspeaker showing the

location of the socket for the wiring

connector from the back can.

Figure 4. Internal wiring between can terminal block and loudspeaker

Installation and Operation Manual

Close-up view of socket for the wiring

connector from the back can.

The loudspeaker is now connected to

the wires from the can and is ready to

mount in the can.

Page 9