Program
selection
For optimum
drying results your
dryer offers several program
groups
and additional
options.
Select the required drying program
from the program table according
to the examples
(see page 23).
Automatic
programs
There are automatic
programs
for different types of textiles
(regular/cotton,
permanent
press).
Regular/Cotton
1
®
Verydry
20 mir.
Permanent
Press
press
Warm 60 m
20 rain
Warm 60
The program
sequence
of
automatic
programs
is controlled
via sensors. The duration
of the
program
depends
on the measured
degree of moisture
in the laundry
and on the selected degree of
dryness (e.g. damp dry).
Time programs
anent press
1
Time programs
run at specific
temperatures.
Suitable for predried,
multi-ply,
delicate textiles or
individual small items. Also for
subsequent
drying.
-
Warm 60 min.
-
Warm 40 min.
-
Warm 20 min.
-
Touch
up
Options
;tart
,.ow
heat ironing
" Filter
Low heat
Press the Low heat button for
temperature
sensitive textiles.
Observe the care information
or
symbols on the textiles.
The temperature
of the drying
process
is reduced, the drying time
is extended.
-[-1 For extreme temperature
sensitive textiles (e.g.
camisoles) press the Low heat
button to reduce the
temperature
of the drying
process.
Easy Ironing
To prevent the laundry from
creasing, the dryer drum rotates
at specific
intervals following the
drying program.
Standard
setting
for this function
is 30 minutes.
If the Easy ironing
button is
pressed, this function
is extended
to 90 minutes.
The laundry remains loose and fluffy
until it is removed. The laundry
should be removed
before the
wrinkle prevention
period ends. This
would be within 30 minutes of the
end of the drying cycle, or within 90
minutes if the Easy ironing
option
has been selected.
Program
sequence
The dryer uses an electronic
scanning system for all programs
except the time programs.
A moisture
sensor continuously
checks the moisture
in the laundry.
Drying ends automatically
as soon
as the selected
degree of dryness
has been reached.
The drum continues
to rotate at
specific intervals for one hour to
prevent creasing.
F-_lf
the indicator
light Wrinkle
blocWEnd
illuminates
when
the program
selector is in
Off-Position
- turn off the
circuit breaker and call for
customer
service!
15
Imprimir página