Dreamline ENIGMA SHDR-60727912 Series Manual de instruções de instalação - Página 9

Procurar online ou descarregar pdf Manual de instruções de instalação para Produto de canalização Dreamline ENIGMA SHDR-60727912 Series. Dreamline ENIGMA SHDR-60727912 Series 17 páginas. Shower door

9. Once leveled, outline the Guide rail brackets' (#08)
position on the wall.
Carefully set the Stationary glass (#02) and Upper
Guide rail (#03) aside.
Remove the Guide rail brackets (#08) from the Upper
guide rail (#03), place the male part of the Upper
guide rail (#03) to the outlined positions on the wall
and mark the drilling holes. Drill the holes using
a Ø 3/8" drill bit.
Insert the **Wall anchors Ø3/8" (#09) and mount the
male part of the Guide rail brackets (#08) onto the
wall using the Large Truss head screws ST6×55 (#10).
See fig. 9 for details.
**NOTE:
The manufacturer strongly recommends
installing these guide rail brackets into studs or
preinstalled 2"x6" wood reinforcements behind the
wall.
For installation into a stud, drill a 1/4" hole up to
the stud and let the screw bore into the wood.
10. Apply a small amount of waterproof silicone into
the Threshold (#15) channel.
Place the Stationary glass (#02) back in position
and attach both female parts of the Guide rail
brackets (#08) to their male parts on the walls.
Tighten the set screws on the Guide rail brackets
(#08) to secure the Upper guide rail (#03)
between the two walls.
Upper guide rail (#03) must be leveled
horizontally. Adjust Guide rail bracket (#08)
using hex key on both ends if it necessary to level
the Upper guide rail (#03). Tighten the screws
from top and bottom of the Guide rail bracket
(#08).
See Fig. 10 and Fig. 11 for details.
"Enigma" Ver.4 Rev.5 02/2016
1
2
Ø 3/8"
3
Fig. 9
1
4
2
5
6
3
Fig. 10
4
5
9