Drehmo 384771 Manual de instruções adicional - Página 7
Procurar online ou descarregar pdf Manual de instruções adicional para Interruptor Drehmo 384771. Drehmo 384771 12 páginas. Simc with limit switching unit
Imprimir página
1. COMMISSIONING
There is a gear wheel at the bottom of the base plate. The figure 1.4 shows the version for
section III. For section II there would be a big instead of a little gear wheel. The opposite
gear wheel is mounted on an output drive of the actuator.
Figure 1.4: limit switching unit input drive gear wheel
The reduction gearing is available for a range between 1.38
is divided into two sections: III (1.38
wheel) and II (12.4
between these ranges requires exchanging the gear wheels on the bottom of the limit switch
base plate. By moving the sliding wheel in one of the positions 4
range can be selected.
Additional operating manual
Figure 1.3: Reduction gearing
135 turns/stroke, large gear wheel to small gear
1450 turns/stroke; small gear wheel to large gear wheel). Changing
1. Shaft of the mechanical position in-
dicator
2. Sliding wheel
3. Scale with possible setting ranges
for the travel
4. Fixing screw for the sliding wheel
1,450 turns/stroke. The range
11, the required travel
7