2045Tech FLOOME Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste 2045Tech FLOOME. 2045Tech FLOOME 1 páginas.

Imprimir página

Instructions manual

MOST COMMON REMEDIES

Should the device present any operating anomalies, it is possible to use this table as a reference to solve most common

problems.

PROBLEM

SOLUTION

Device is not recognized by the

Try to turn off and restart the

application

application and try it on another

smartphone.

sure

the

application has access rights to

the microphone

Follow the instructions on the

displayed on the application

application to improve the use of

the device.

Despite

having

followed

the

Verify that no foreign elements are

tutorial, the measurement cannot

present in the whistle chamber. To

completed.

The

device

this purpose, use a cotton swab

produces a different whistle from

and inspect the chamber with a

the usual one.

light.

Should the device present further problems, stop using it immediately, and ask for assistance to 2045Tech S.r.l.

SERVICE AND CALIBRATION

is always in optimal conditions, and can deliver you accurate measurements, we advice you to have it calibrated after

app that will advice you to go to the website www.floome.com

to buy the recalibration service

2. The service is very straightforward: a recalibration voucher will be generated, which will have printed on it the address of the

nearest recalibration facility, and a unique code (which will be sent to you by e-mail)

3. Once you have printed the voucher, you will need to send the device through ordinary mail or express courier using the

material while packing the device to avoid any damage during shipping. Thus, we advice you to choose wisely the shipping

method, and consider to opt for a shipping insurance.

will be returned to you by ordinary or express shipping.

SAFETY INSTRUCTIONS

Use the product only for its intended purpose and in accordance with the instructions for use, which can be viewed by visiting

the website: http://www.floome.com - This device is only intended to be used for the detection of blood-alcohol content and not

to determine the capability of an individual to drive also because alcohol consumption is perceived differently from person to

person. However, it is known that the assumption of alcohol compromises the reflexes and the ability to drive exposing the driver

and passengers to potential dangers - This device is intended for private use only and it is not designed and/or intended for

commercial or industrial use. Use the device only if in perfect condition. If any parts are damaged or there is a suspected

Never put the device into water or any other liquids, the device is neither waterproof nor water-resistant. To clean the device, use

PARTS IDENTIFICATION

enumerated parts:

(1) main body of the device, (2) silicone mouthpiece, (3)

circular room, (4) fluid outlet and (5) 3.5mm jack interface.

MAINTENANCE

Repair or maintenance of the device can be carried out only

by experts appointed by 2045Tech S.r.l. Only original parts

may be used for repair. The device contains no part that

will void the warranty. It is required for the user to respect

the intervals, and maintenance methods discussed later in

this manual.

ACCESSORIES AND SPARE PARTS

Only accessories and spare parts explicitly endorsed by 2045Tech S.r.l. are available to the end user for direct application to or

replacement in the product.

INTENDED USE

understood as merely indicative, and not as an evaluation of the state of a person or of his ability to drive.

STORAGE

The device must be kept in an environment, which is compatible with its characteristics. It can be stored without being used for

up to 10 years, but this would compromise the performance of the sensor, that is no longer guaranteed at that point.

FURTHER ADVICE

CLEANING

The device should never be submerged in liquids. The mouthpiece is the only washable part. It can be cleaned only with neutral

If no improvement is detected,

verify

that

the

3.5mm

jack

soap, and has to be reinstalled only once completely dry.

contacts are cleaned.

CE MARKING

If necessary, rely on the interactive

handled by 2045Tech S.r.l. - Via delle Cape 3/5 - 30021 Caorle (VE), Italy. For a copy of the declaration of conformity,

tutorial provided in the application.

please visit our website at: http://www.floome.com.

If foreign elements are not easily

FCC MARKING

removable, remove the mouthpie-

ce and blow in the air outlet to eject

may not cause harmful interference, and (2) this device must accept any interference received, including interference

the elements from the intake.

that may cause undesired operation.

DISPOSAL OF PRODUCTS

This symbol indicates that this product must not be disposed of with household products. Correct disposal of this product will

help prevent potential negative consequences for the environment, and human health, which could result from improper

handling of the product as waste. For more detailed information about the recycling of this product, please contact your local

MEASUREMENT

measurement process absolutely intuitive.

REQUIREMENTS

(8.1+) operating system. Through the several application marketplaces, which are different depending on the operating

replaces the present measurement instructions.

INSTALLING/REPLACING THE MOUTHPIECE

The device is provided with a mouthpiece, already installed. To replace it, temporarily or permanently, you can simply rotate it

180 degrees, and pull it vertically, until detachment. The new mouthpiece can be installed by simply pushing it onto the

protruded part the previous mouthpiece was attached to.

REQUIREMENTS OF THE SUBJECT TAKING THE TEST

It is essential for the accuracy of the measurement that the subject has not ingested alcoholic beverages for at least 20

minutes prior to the test. Residual presence of alcohol in the mouth can affect the measurement, it is therefore necessary to

rinse with water. Ingesting aromatic drinks such as fruit juices, although not alcoholic, can affect the measurement if ingested

overestimation of the measurement. Before testing, the subject has to breathe normally, and just before blowing, he has to be

TAKING THE TEST

1. Turn the mouthpiece and extend the 3.5mm jack from the device

4. Follow the instructions in the application to enable the

5. Blow consistently but not too hard up until the smartphone

vibrates or flashes indicating the end of the testing process

7. If the presence of an error is mentioned, try to modify the intensity

or duration of the blow, as suggested by the application, to obtain a

measurement

TECHNICAL SPECIFICATIONS

SIZE

PRODUCER

This device is designed and manufactured in Italy by:

any communication can be made through the website www.2045tech.com or by email to [email protected].

INTELLECTUAL PROPERTY

The design of the device is protected by a U.S. design patent (US D706149 S1) and the vortex flow-meter by a pending

MISCELLANEOUS

causes that may alter the results of the tests, etc.

is a non-registered trademark used by 2045Tech S.r.l.

resistant, in principle. The mouthpiece is made of a non-toxic solvent-free silicone

rubber, suitable for lip contact.

Electrochemical fuel-cell sensor, combined with a vortex whistle flow-meter.

The display interval matches the measurement interval. If a sample with more than

the maximum measurable concentration is introduced, the text "> .250 g/dL" will be

shown.

Operating: 10-40°C, non-condensing humidity between 10 and 90%, ambient

The minimum sampled volume is 0.5L and it requires a duration of the blow of at

least 2.5 seconds.

The device does not require any external power source. It is equipped, inside, with a

2045Tech S.r.l.

Via delle Cape 3/5 - 30021 Caorle (VE)

[email protected] - www.floome.com

Rev. 1.1 - 30/03/2015