Bosch 2 Manual do utilizador e instruções de instalação - Página 40

Imprimir página

Bosch 2 Manual do utilizador e instruções de instalação

en Troubleshooting

Fault

The spin programme

does not start.

Rushing, hissing

noise.

Loud noises during

the spin cycle.

Banging noises, rat-

tling in the drain

pump.

Slurping, rhythmical

suction noise.

Creasing.

Cause and troubleshooting

Drain pipe or water outlet hose is blocked.

Clean the drain pipe and the water outlet hose.

▶

Drain pipe or water drain hose is caught or jammed.

Ensure that the drain pipe and water drain hose are

▶

not kinked or trapped.

The unbalanced load detection system has interrupted

the spin cycle because the laundry is unevenly distrib-

uted.

Redistribute the laundry in the drum.

▶

Note: Where possible, mix large and small items in

the drum. Different sized items of laundry distribute

themselves better during the spin cycle.

Start the Spin programme.

▶

Water is flushed under pressure into the detergent

drawer.

Not a fault – normal operating noise.

▶

Appliance is not correctly aligned.

→ "Aligning the appliance", Page 15

▶

The appliance feet are not fixed.

Secure the appliance feet.

▶

→ "Aligning the appliance", Page 15

Transit bolts have not been removed.

→ "Removing the transit bolts", Page 13.

▶

Foreign bodies have got into the drain pump.

→ "Cleaning the drain pump", Page 31

▶

The drain pump is active, the detergent solution is

pumped out.

Not a fault – normal operating noise.

▶

The spin speed is too high.

The next time you run a wash cycle, set a lower

▶

spin speed.

The load is too large.

The next time you run a wash cycle, reduce the

▶

amount of laundry being loaded.

Unsuitable programme for the type of fabric.

Select the programmes that are suitable for the

▶

type of fabric.