Electrolux # Manual de utilização e cuidados - Página 20

Changing and replacing the interior oven

light (some models)

Be sure the range is unplugged and all parts are COOLbefore

replacing oven light. Wear a leather-faced glove for protection

against possible broken glass.

The glass shield and wire holder must be in place

whenever the oven is in use. This shield helps protect the

appliance bulb from high temperatures.

The interior oven light bulb is located on the rear wall of the

oven and is covered with a glass shield held by a wire

holder.

Oven

Light

Wire

Holder

Fig. 1

To replace the interior oven light bulb:

Turn electrical power off at the main source or unplug

the range.

Open oven door for access to interior oven light. Once

located, press wire holder to one side to release the

glass shield (See Fig.l).

Replace bulb with a new 40 watt appliance bulb.

Replace glass shield over bulb and snap wire holder

into place.

Turn power back on again at the main source (or plug

the range back in).

The clock will then need to be set with the correct time

of day. To reset, see "Setting the Clock" in this Use &

Care Guide.