Drija EUROPA 60 GAS GRILL Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Forno Drija EUROPA 60 GAS GRILL. Drija EUROPA 60 GAS GRILL 20 páginas. Gas in built oven

Ventilation

The appliance may only be installed in a permanently ventilated room as specified in

the regulations. The air flow in the room where the appliance is installed should be

sufficient for proper gas combustion and ventilation of the area. The air intakes,

protected by grilles, must be of the appropriate size (see relevant regulations) and

placed in such a way that they cannot be even partially obstructed. The kitchen

should be kept adequately ventilated to disperse the heat and moisture produced by

the cooking processes: in particular, a window should be opened or a fan.

Discharge of combustion gas

The flue gases must be removed by means of hoods

connected to a natural draft chimney or fan extraction

system. An effective extraction system requires careful

design by an authorized specialist, and must meet

distances and regulatory positions. After installation, the

engineer must issue a certificate of conformity.

Gas Connection

Connection with copper tube:

 The connection to the gas supply network must

be made in such a way that no voltages are

applied to the appliance. The connection can be

made using the adapter of unit D with two conical

elements, always adjusted the board C supplied.

Connection with steel tube:

 Only use stainless steel hoses that comply with the relevant regulations, and

always seal C properly fit between fitting A and hose E.

 When connecting with a hose, make sure that the length of the pipe is not

more than 2 meters; also make sure that the hose does not touch moving

parts or that it is crushed.

ADAPTING TO OTHER GAS TYPES

Before proceeding with the adaptation, disconnect the device from the electric

current.

User Manual

GAS IN BUILT OVEN | EUROPA 60 GAS