Atlas DAGNY Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Ventilador Atlas DAGNY. Atlas DAGNY 10 páginas. Ceiling mounted rotational fan

4. If your outlet box has a GROUND wire

(Green or Bare Copper) connect this wire to

the Hanger Ball and Hanger Bracket Ground

wires. If your outlet box does not have a

Ground Wire, then connect the Hanger Ball

and Hanger Bracket Ground Wires together.

Secure wire connection with the plastic wire

nut provided. (Fig. 12)

5. Tuck connections neatly into ceiling outlet

box.

6. Slide the canopy up to hanger bracket and

place the key hole on the canopy over the

screw on the hanger bracket, turn canopy

until it locks in place at the narrow section of

the key holes. (Fig. 13)

7. Align the circular hole on canopy with the

remaining hole on the hanger bracket, secure

by tightening the two set screws. Note: Adjust

the canopy screws as necessary

canopy and canopy cover are snug.

Warning: Make sure tab at bottom of hanger

bracket

is properly

seated

hanger

ball

before

attaching

bracket. Failure to properly seat tab in groove

could cause damage to electrical wiring.

Outlet

Hanger

bracket

until the

in groove

canopy

bOX--.[

'lli

<.~.i)-canopy

Figure 13

Screws

cover