Bose Lifestyle 48 Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Altifalantes Bose Lifestyle 48. Bose Lifestyle 48 42 páginas. Personal music center ii - owner's guide
Também para Bose Lifestyle 48: Manual (29 páginas), Manual de instalação (36 páginas), Manual do Proprietário (25 páginas), Manual do Proprietário (24 páginas), Manual do Proprietário (13 páginas), Manual de configuração rápida (3 páginas), Manual do Proprietário (30 páginas), Manual de resolução de problemas (32 páginas)

ASIC

YSTEM

Jewel Cube speakers

Figure 8

Making a plug-in cable

connection

ONNECTIONS

Each LIFESTYLE

DVD system includes five cube speakers. Use the supplied 20-foot

(6.1-meters) cable to connect the three speakers arranged at the front of your room. Use the

supplied 50-foot (15.2-meter) cables for your surround speakers, pulling the cables apart to

run them in different directions around your room.

Your system may feature Jewel Cube

Follow the instructions below for connecting them. Or, you may have cube arrays or single

cube speakers, which use a two-wire cable for connections. Instructions for connecting them

appear on page 13.

CAUTION: Before you make any connections, be sure that the media center, the Acoustimass

module, and any additional equipment are NOT connected to AC power.

The plug-in cable for your speakers fit only one way into the jack, which ensures proper

polarity (+ to + and – to –) connections.

1. Match each cable, according to its location marking, with the speaker placed in that

location:

• Front speaker cables have blue RCA connectors on one end and speaker plugs on the

other end with L (left), R (right), or C (center) markings.

• Surround speaker cables have orange RCA connectors on one end and speaker plugs

on the other end with L (left) or R (right) markings.

2. Orient the plug with its small knob up, so the plug slips easily into a notch on top of the

jack on the back of each speaker.

3. Insert the plug of each speaker cable fully into the jack on the rear of its respective

speaker.

4. Follow the instructions on page 13 to connect each cable to the corresponding jack on

the Acoustimass module.

Français

speakers, which use a plug-in type of cable connector.

Español

English