Bose PANARAY 620M Manual de serviço - Página 14

Procurar online ou descarregar pdf Manual de serviço para Altifalantes Bose PANARAY 620M. Bose PANARAY 620M 21 páginas. Multi-position floor array
Também para Bose PANARAY 620M: Manual de instalação (4 páginas)

Imprimir página

DISASSEMBLY PROCEDURES

Panaray Model 620M

Loudspeaker

Refer to figure at right for the

following procedures.

1. Grille Removal

1.1 Remove the four screws (11)

using a Phillips-head screwdriver.

1.2 Lift off the grille (1).

2. Handle Removal

2.1 Perform procedure 1.

2.2 Remove the two screws (13).

Lift off the handle (3).

3. Woofer Removal

3.1 Perform procedure 1.

3.2 Remove the four screws (12).

3.3 Lift out the woofer (2) and

disconnect the wires from the

terminals.

Re-assembly Notes: Be sure to observe

polarity when connecting the new woofer to

the wiring harness.

4. Tweeter Driver Removal

4.1 Perform procedure 1.

4.2 Remove the four screws (14).

4.3 Lift out the driver (5) and disconnect the

wires from the terminals.

Re-assembly Notes: Be sure to observe

polarity when connecting the new driver to

the wiring harness.

5. Neutrik

Speakon

5.1 Remove the two screws (15) for the jack

you wish to remove.

5.2 Lift off the input jack (10). Cut the wires

as close to the jack as possible. Refer to the

wiring diagram in the back of this manual

when installing the new jack.

6. Crossover Assembly Removal

6.1 Perform procedure 3.

6.2 Disconnect the crossover harnesses

from the woofer, tweeters and input jacks.

6.3 Remove the four nuts that secure

the crossover assembly (7) to the input

panel (9). Lift out the crossover assembly.

Jack Removal