Atlas Copco BV Series Manual de instruções de segurança e de funcionamento - Página 10
Procurar online ou descarregar pdf Manual de instruções de segurança e de funcionamento para Ferramentas Atlas Copco BV Series. Atlas Copco BV Series 17 páginas. Beams and screeds
Imprimir página
BV 20H
Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
BV 20H is a non-vibrating beam and is not equipped
with a motor vibrator.
Main parts
A.
Handle
Turn head
B.
C.
Beam
Operation
Preparations before operating
Operating
NOTICE The handle is disassembled to save space
when transporting.
Assembly of handle link
© 2015 Construction Tools EOOD | No. 9800 1722 01 | 2015-04-16
Original instructions
A
B
C
Safety and operating instructions
Install the handle link (A). Check that the blocking
pins (B) engages the holes in the tube to lock the
handle and link firmly together.
A
Preparations
BV 20H
1. Check the general condition of the equipment.
NOTICE Replace any damaged part
immediately.
General inspection
Before using the BV 20H:
1. Clean and inspect the machine and the functions
before use.
2. Check for damages.
Adjusting the work angle
1. Slide the beam on the surface of the concrete.
2. Simultaneously turn the handle link in the counter
clockwise direction.
3. Position the handle link on your shoulder.
4. Pull the beam backwards.
B
B
9