Bose RoomMatch Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Sistema de altifalantes Bose RoomMatch. Bose RoomMatch 24 páginas.

Components

Component Description – Rigging Hardware and Accessories

RoomMatch™ Array Frame rigging accessories are designed for fixed-installation overhead suspension of RoomMatch full-range and

subwoofer array modules. Use with non-RoomMatch loudspeakers is not recommended.

Page 4

Installation and Safety Guidelines

RMAFSM Small Array Frame. Use with 1 to 4 full-range or subwoofer modules in

overhead suspended arrays.

RMAFLG Large Array Frame. Use with 4 to 8 full-range or subwoofer modules in over-

head suspended arrays. Compatible with Long and Short Extender Bars (see below).

When used with Extender Bars, the Large Frame will support up to 8 modules, with an

additional 2 subwoofer modules mounted behind the primary array. This is the largest

array possible and typically requires the RMPULL bracket for 3-point suspension for

most array pitch angles.

RMXLNG Long Extender Bars. Use with Large Array Frame to accommodate up to 2

subwoofer modules mounting in back of primary array. Also provides additional shackle

mounting holes to allow more extreme angles for 2-point mounting. Kit of left and right

pair with fasteners.

RMXSRT Short Extender Bars. Use with Large Array Frame to accommodate up to 2

subwoofer modules mounting in back of primary array. Also provides additional shackle

mounting holes to allow more extreme angles for 2-point mounting. Kit of left and right

pair with fasteners.

RMPULL Pull Back Bracket. Use with bottom-most array module to provide third-

point suspension to building structure to allow more extreme downward angle of arrays

than possible from 2-point, gravity-hang suspension. The RMPULL bracket can also be

used as a "mini frame" for suspending 1 or 2 modules. Single bracket with fasteners.

RMBRKT Surface-Mount Bracket. Allows a single full-range module to be mounted

on flat surfaces, such as building walls or ceilings. The brackets allow pitch angle

adjustment from 0° up to -90°, depending on module. Brackets attach to the side-plate

rigging hardware of each full-range module. (RMBRKT bracket is NOT intended for use

with RoomMatch subwoofer modules.) Kit of left and right pair with fasteners.

pro.Bose.com