Bose SoundTouch Manual de serviço - Página 35

Procurar online ou descarregar pdf Manual de serviço para Conversor de multimédia Bose SoundTouch. Bose SoundTouch 39 páginas. Wireless pedestal
Também para Bose SoundTouch: Manual do Proprietário (33 páginas), Manual do Proprietário (32 páginas), Manual de início rápido (2 páginas), Manual (9 páginas), Manual do Proprietário (20 páginas), Manual do Proprietário (32 páginas), Manual de início rápido (5 páginas), Manual Iniciar aqui (20 páginas), Manual de início rápido (2 páginas), Manual do Proprietário (18 páginas), Manual de início rápido (5 páginas), Manual de início rápido (2 páginas)

Imprimir página
Bose SoundTouch Manual de serviço

SERIAL NUMBER AND COUNTRY CODE PROGRAMMING

Perform both of these procedures any time
the Wi-Fi Module is replaced.
Download two macros from the
SoundTouch
TM
product's repair information
page located on http://serviceops.bose.com.
Place these macros in the Tera Term pro-
gram folder.
set_serial_number.ttl
set_country_code.ttl
1. Setting the Serial Number
1.1 Connect the SoundTouch wireless
pedestal to a computer as shown in the TAP
command setup procedure on pages 31 -
32.
1.2 Within Tera Term, select Control then
Macro and Select the file -
"set_serial_number.ttl"
1.3 Follow the prompts.
2. Setting the Country Code
2.1 Connect the SoundTouch wireless
pedestal to a computer as shown in the TAP
command set up procedure on pages 31 -
32.
2.2 Within Tera Term, select Control then
Macro and Select the file -
"set_country_code.ttl"
2.4 Follow the prompts.
Note: Selecting us sets the Wi-Fi module to
the US standard channels 1-11. Selecting eu
sets the Wi-Fi module to EU standard
channels 1-13
3. Reading the Country Code.
3.1 Type the command "local_services on"
and <enter>. Then press CTRL-C on the
keyboard. Then type "e" and <enter>. The
command line lisa login: should be displayed
on the computer.
3.2 Type the command "root" and <enter>.
The command line should be
root@lisa:root#.
3.3 Enter "cat /var/tmp/mfgdata.xml". The
country code is displayed in the first line of
the response.
3.4 Return to CLI prompt by entering the
command "rm /mnt/nv/local_services" and
<enter>.
3.5 Enter the command "exit" and <enter>.
This will return to the TAP interface (CLI) and
a TAP command line "->" should be shown.
35