anko 43056125 Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Altifalantes anko 43056125. anko 43056125 10 páginas. Bluetooth party speaker

Imprimir página

Prepare the remote control

To insert the remote control batteries:

1. Open the battery compartment.

2. Insert 2 x AAA batteries with correct polarity (+/-) as indicated. The 2xAAA battery not

include in our products, please purchase from Authorized Seller.

3. Close the battery compartment.

Please Note:

If you are not going to use the remote for a long time, remove the batteries.

Do not use old and new or different type of batteries in combination.

Batteries contain chemical substances, so they should be disposed of properly.

Turn On

1. Connect the AC power cable and plug to the wall socket;

2. Press the "POWER" button to o "ON" status to power on the speaker.

The speaker will be powered by AC power and set the power switch on rear panel to ON

position.

3.Press the POWER button on the top panel or on the remote control to turn it into Standby

mode,Press the POWER button on the top panel or on the remote control to turn off the

speaker and get into Standby mode, press for a few seconds again to turn on the speaker.

Caution:

If you do not use this unit for a while, please switch the "POWER" button to "OFF" status,

and disconnect the AC power cable of this unit.

Charging the internal Battery

The speaker comes with a built-in rechargeable battery, follow the below steps to charge it:

1. Connect the power cable and plug to the wall socket on the rear

Turn on the power ON/OFF button on rear and top panel, there is a

on the bottom left corner of the display panel, it will light up and slowly ﬂash, that is being

charge.

3.When the battery indicator light on the top left corner of the display pane light up, the

battery is fully charged, then unplug the power cable to stop charging, both top and

bottom indicator light will turn off automatically.

Intrenal Battery Level indicator

1. When the battery is running out, the battery indicator light on the bottom left corner light

up and quickly ﬂash.

2. During playing, if you hear a "DI" sound from the speaker means the battery is running

out and the speaker will turn off after 1 minute.

3.Please pay attention to the speaker sound, if the sound becomes abnormal, please

charge the internal battery on time to keep the battery life.

Note: please fully charge the product when it is not going to be used for a long time and

charge once a month to keep longer battery life.

panel to start charging

battery indicator light

4.Play

Basic key play operations

You can control play through following operations.

Key

Function

1.Press this previous button for previous track when playcing

music on USB or Bluetooth mode.

2.In FM mode, short press this button to adjust FM frequency

for 0.1MHz, or long press this button to search FM radio

from 108-87.5MHz automatically.

1.Press this PLAY/PAUSE button to play or pause the music

when playcing music on USB or Bluetooth mode.

2.Or press for a few seconds to disconnect the bluetooth if

speaker at Bluetooth mode.

Press this EQ button to switch the different music effect.

Note: It cannot switch if the BASS is on.

Press the POWER button to turn off the speaker and get into

Standby mode, press for a few seconds again to turn on the

speaker.

Insert the Line-in cable to external device.

Insert the USB driver to USB socket to play music.

1.Press this previous button for previous track when playing

2.In FM mode, short press this button to adjust FM frequency

Press this M button for function mode switching between

Bluetooth/AUX/USB/FM modes.

1.Turn this VOLUME knob for volume increase or decrease

when playing music, the display will show from U 00 to

U 40 .

2.Press this VOLUME knob for one time to turn to the echo

volume level of microphone if using wired microphone,

the display will show " E ", then turn the knob to adjust the

sound volume of microphone echo.

3.Press this VOLUME knob for twice to turn to the

volume level of microphone if using wired microphone,

the display will show " C ", then turn the knob to adjust the

sound volume of microphone.

4.Press this VOLUME knob for twice to turn to the volume

level of guitar if using wired guitar, the display will show

" C ", then turn the knob to adjust the sound volume of guitar.

Press this BASS button for turn on or off the bass strong effect.

Press this LED button for turn on and off, or switch the light

effect.

AC Input jack

Insert the 6.35 wired microphone to the MIC jack.

Insert the 6.35 Guitar to the GUITAR jack.

music on USB or Bluetootth mode.

for 0.1MHz, or long press this button to search FM radio

from 87.5-108MHz automatically.