DSC PC 2500 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Sistema de segurança DSC PC 2500. DSC PC 2500 15 páginas.
Também para DSC PC 2500: Manual de instruções (17 páginas)

Imprimir página

PROGRAMMING ADDITIONAL ACCESS CODES

Up to 7 access codes in addition to the Master Code can be entered from the

keypad.

Press [ ], [5] and [Master Code]. The "Program" light will flash and the zone

lights will show which codes have already been programmed. To enter a new

code or change an existing code, first press the code number (1 to 8) and then

enter your [4 digit] code. To erase a code, press [

code. Note that the [ ] and [#] keys cannot be used in a code.

Pressing [#] returns you to ready mode.

QUICK-ARM FEATURE

When the Quick-Arm feature is enabled, the panel may be armed simply by

entering [ ], [0] instead of a 4 digit code. The [ ], [0] command will not disarm

the panel.

Enter [ ], [6], [Master Code], [4] to turn ON and OFF the Quick-Arm feature.

When the command is entered, the keypad will beep 3 times if the feature is

being enabled and will sound one long beep if the feature is being disabled.

Press [#] to return to Ready.

DOOR CHIME FEATURE

The door chime feature is used, while the panel is disarmed, to provide a tone

from the keypad each time a door or window is opened or closed. The doors and

windows which will provide this indication are programmed by your installer.

Enter [ ], [6], [Master Code], [6] to turn the door chime feature ON and OFF.

When the command is entered, the keypad will beep 3 times if the feature is

being enabled and will sound one long beep if the feature is being disabled.

ALARM TEST

Enter [ ], [6], [Master Code], [8] for a 2 second test of the keypad lights, keypad

sounder and alarm bells.

KEYPAD ZONES

There are three zones which can be activated from the keypad. They are

activated by pressing two keys at the same time and holding them for 2 seconds.

These zones may or may not be active on your keypads depending on how your

installer has programmed them.

[1]+[3] Keypad FIRE zone. Pressing this key for 2 seconds will activate the

keypad fire zone and the bell/siren output will pulse ON and OFF.

This zone is annunciated by the "Fire" light on the keypad.

[4]+[6] Keypad AUXILIARY zone. Pressing this key for 2 seconds will

produce a series of beeps on the keypad along with the

transmission. To confirm transmission, the keypad sounder will

beep 6 times.

[ ]+[#] Keypad POLICE zone. Depending on how your installer programs

the panel, pressing this key for 2 seconds may produce a

completely silent alarm or an audible alarm along with the

transmission. If programmed as audible, the alarm bell will ring.

] instead of a [4 digit]