DSC PC5108L Manual de instalação - Página 11

Procurar online ou descarregar pdf Manual de instalação para Sistema de segurança DSC PC5108L. DSC PC5108L 17 páginas.

M O D U L E

Depending on the type of device connected, the SYNC input must be

programmed for Normal or Inverted operation. If normal operation is

selected (default), the PC5108L will switch cameras on a low to high

transition (rising edge). If the inverted option is selected, the PC5108L

will switch cameras on a high to low transition (falling edge).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

External/Internal Dwell Control .................. Subsection [50] Option [4]

SYNC Input Inverted/Normal ..................... Subsection [50] Option [6]

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

4.5 Module Supervision

The control panel only supervises the PC5108L when the Module

Zone Group Assignment section is programmed. When PC5015

programming section [903] Module Supervision Field is entered, the

zone lights corresponding to the zone group assignments will repre-

sent the PC5108L.

The DLM-4L is supervised when the DLM-4L Is Connected option is

enabled. This option must be enabled when using the DLM-4L. When

section [903] Module Supervision Field is entered, the DLM-4L will be

represented by zone light [23].

A Downlook Supervisory Trouble is generated when the panel no

longer detects the DLM-4L on the system. To clear this trouble, enter

Section [902] Supervision Reset. A Downlook Supervisory trouble

restoral will be logged to the event buffer when the trouble is cleared.

For information on module supervision, see the PC5015 Installation

Manual (Section 2.7 "Enable Supervision").

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Supervision Reset ............................................................ Section[902]

Module Supervision Field ............................................... Section [903]

DLM-4L Is Connected ................................ Subsection [50] Option [8]

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

O P E R A T I O N

A N D

P R O G R A M M I N G