ansio 1321 Manual de instruções e de utilização - Página 7

Procurar online ou descarregar pdf Manual de instruções e de utilização para Aquecedor ansio 1321. ansio 1321 13 páginas. Oil filled radiator heater

FUNCTION SWITCHING

Pressing the MODE button on the heater or

on the remote repeatedly

cycles through the modes as below:

The High Power Mode, Medium Power Mode and Low Power Mode can

be distinguished by the length of the power level indicator bar on the

Display panel while the Eco mode is displayed as "eco" in green.

High Power Mode:

The heater operates at 2300W.

Medium Power Mode:

The heater operates at 1300W

Low Power Mode:

The heater operates at 1000W.

Eco Mode:

The Eco mode is intended for saving power. When you select the ECO

mode using the Mode button either on the heater or using the remote, the

heater will automatically set the power level for maximum energy efficiency

by comparing the set temperature and the room temperature.

NOTE: If the room temperature is above the set temperature, the heater

will switch ON for a few minutes and then automatically switch OFF.

When the heater is ON, press the

and

buttons

the

heater or + and - buttons on the remote to set the desired temperature

level. The available temperature range is between 5˚C and 35˚C. When

the room reaches the set temperature level, the heater will go to the

standby mode. Once the room temperature drops below the set

temperature, the heater will turn ON automatically.

TIMER SETTING

Stop Timer

When the heater is turned ON, press the Timer button

on the control

panel or on the remote to set the desired number of hours by when you

want the heater to stop. You can set a value between 1-24 hours by

pressing

the

and

buttons to increase and decrease the

timer by 1 hour respectively. To cancel the Timer, press the power button

twice. The timer can only be operated in increments or decrements of

hours.

ANSIO 1321 (M20v01)