DSC HS2LCDWF v1.0 Manual de instruções de instalação - Página 2

Procurar online ou descarregar pdf Manual de instruções de instalação para Teclado DSC HS2LCDWF v1.0. DSC HS2LCDWF v1.0 9 páginas. Wireless keypad

Imprimir página

DSC HS2LCDWF v1.0 Manual de instruções de instalação

Installation Instructions

The HS2LCDWF wireless keypad is compatible

with the HS2016/32/64 and HS2128 PowerSeries

Neo wireless panels.

Specifications

• Temperature range: -10°C to +55°C (14°F to 131°F)

UL/ULC: 0°C to +49°C (32°F to 120°F)

• Humidity (MAX): 93%R.H. non-condensing

• Plastic enclosure protection degree: IP30, IK04

• Power adaptor output voltage: 9.0V

els - US/Latin America: xx; Canada:

xx; AUS./NZ:

xx;

China: xx limited power supply,

acceptable to the authority having jurisdiction

• Battery: 4 AA, 1.5 V, Energizer alkaline consumer-

grade

• Low Battery Indication: 4.3 V

• HS2LCDWF current draw: 50mA

• Wall-mount tamper

• 5 programmable function keys

• Ready (Green LED), Armed (Red LED), Trouble/RF

Jam (Red/Yellow LED), AC (Green LED)

• Frequency: 433.92MHz

(xx only/xx only)

• Frequency: 868.35MHz

(xx only)

• Frequency: 915MHz

(xx only)

• Up to 128 wireless zones

NOTE: DSC recommends that the keypad be powered by

the AC adaptor and the batteries for EN installations.

When the power adaptor is used, batteries provide mini-

mum 24h back-up.

Unpacking

The HS2LCDWF keypad package is available in

five distinct configurations, described below

The keypad contains patented technology for the

Proximity (Prox) Tag.

HS2LCDWF - wall mount HS2LCDWFP - prox tag

• 1 HS2LCDWF keypad • 1 HS2LCDWF keypad

• 1 HS2LCDWF wall

bracket

• 1 Installation Manual

• 1 inner door sticker

• 4 AA batteries

• 1 hardware pack

• 1 prox tag

HS2LCDWFPV - prox

tag w/ verbal

annunciation

• 1 HS2LCDWFBRK wall

bracket

• 1 Installation Manual

• 1 inner door sticker

• 1 power adaptor

• 4 AA batteries

• 2 hardware packs

• 1 prox tag

HS2LCDWFPV - prox tag w/ verbal

@ 1.25A. Mod-

annunciation, transformer and deskstand

xx;

EU: xx; UK:

• 1 HS2LCDWFBRK wall

bracket

• 1 Installation Manual

• 1 inner door sticker

• 1 power adaptor

• 4 AA batteries

• 2 hardware packs

• 1 prox tag

Mounting

Mount the keypad where it is accessible from desig-

nated points of entry and exit. Once a dry and secure

location has been selected, perform the following

steps to mount the keypad.

Wall Mounting Plate

1. Locate the screw holes (4) at each corner of the

mounting plate.

2. Use the four screws provided to affix the mount-

ing plate to the wall; ensure the mounting tabs

are facing you (see diagram below). If the keypad

is to be mounted on drywall, use plastic anchors

(not supplied).

3.Align the four mounting slots in the HS2LCDWF

housing with the four mounting tabs protruding

from the mounting plate.

4. Slide the keypad into place.

5. Firmly but carefully snap the keypad down onto

HS2LCDWFPV - prox

tag w/ verbal annuncia-

tion and transformer

• 1 HS2LCDWFBRK wall

bracket

• 1 Installation Manual

• 1 inner door sticker

• 1 power adaptor

• 4 AA batteries

• 2 hardware packs

• 1 prox tag

• 1 transformer

Desk Stand -

HS2LC-

• 1 transformer

DWFDMK

•1 HS2LCDWFDMK desk

1. Insert the four rub-

stand

2. Place the desk stand on a secure, uncluttered sur-

3.Align the four mounting slots in the HS2LCDWF

4. Slide the keypad into place. Firmly but carefully

5. To fasten the keypad securely onto the desk

Apply Battery Power

1. Slide the keypad up and out from the mounting

2. Insert the batteries as directed on the back of the

3. Replace the keypad on the mounting plate/desk

the mounting plate.

Mounting tab

Screw hole

Mounting tab

Screw hole

ber feet (found in

the hardware pack)

into the indentations

provided in the bot-

tom of the desk

stand.

face.

housing with the four mounting tabs protruding

from the desk stand.

snap the keypad down onto the desk stand.

stand, locate the hole in the centre of the bottom

of the desk stand. Using the screws provided,

screw the keypad to the desk stand.

plate/desk stand (removing the screws first if

required). The bay for the four AA batteries is

open and visible at the back of the keypad.

keypad. Ensure the correct polarity is observed.

stand.

Screw hole

Mounting tab

Screw hole