FoxGate S6208-S1 Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Interruptor FoxGate S6208-S1. FoxGate S6208-S1 16 páginas.

FoxGate S6200 Series Installation Guide

Chapter 2

2.1

To ensure the proper operation of FoxGate S6200 series and your physical security,

please read carefully the following installation guide.

2.1.1

The switch must be installed in a clean area. Otherwise, the switch may be damaged

by electrostatic adherence.

Maintain the temperature within 0 to 50 °C and the humidity within 5% to 95%, non-

condensing.

The switch must be put in a dry and cool place. Leave sufficient spacing around the

switch for good air circulation.

The switch must work in the right range of power input (AC power: 100 ~ 240VAC

(50Hz))

The switch must be well grounded in order to avoid ESD damage and physical injury

of people.

The switch should avoid the sunlight perpendicular incidence. Keep the switch away

from heat sources and strong electromagnetic interference sources.

The switch must be mounted to a standard 19'' rack or placed on a clean level

desktop.

2.1.1.1 Dust and Particles

Dust is harmful to the safe operation of FoxGate S6200 series. Dust can lead to

electrostatic adherence, especially likely under low relative humidity, causing poor

contact of metal connectors or contacts. Electrostatic adherence will result in not only

reduced product lifespan, but also increased chance of communication failures. The

recommended value for dust content and particle diameter in the site is shown below:

Max Diameter (µm)

Max Density

(particles/m³)

Table 2-1 Environmental Requirements: Dust content

Hardware Installation

0.5

1.4×10

7×10

Chapter 2 Hardware Installation

2.4×10

1.3×10