AirTight 60403 Manual do operador - Página 4

Procurar online ou descarregar pdf Manual do operador para Ferramenta eléctrica AirTight 60403. AirTight 60403 4 páginas. 12v led digital tire inflator

Imprimir página

NOTICE

The ON/OFF button can be

used to override the preset pressure

value if required.

8. To operate lights, toggle switch from

the "OFF" position to either the "Light",

TROUBLE SHOOTING

INFLATOR DOES NOT WORK WHEN

SWITCHED TO "ON"

• Power cord may not be plugged in

completely. Check the connection.

• Check vehicle power outlet and power

plug terminals for dirt. Use a non-

conductive probe, not fingers or metal, to

clean.

• Check to see if the pre-programmed

pressure is set to a lower PSI than your

tire currently is reading (i.e., the digital

gauge is set to 15 psi but your tire is at

2o psi; in this scenario, the inflator will

not turn on) Refer to the digital gauge

operating instructions and set the PSI to

the correct tire pressure.

• Check vehicle power outlet fuse, which

should be a minimum of 15 Amps.

• Fuse may have blown. Check fuse in

power plug adaptor and replace if

"Flash" or "SOS" positions for desired

lighting.

9. Unplug the power cord from 12V DC

power outlet.

necessary with one of the same

amperage. NEVER replace a blown fuse

with a fuse having a higher rating.

UNIT IS RUNNING BUT TIRE IS NOT

INFLATING

• Check that the air hose connector is

attached properly to the tire valve stem.

• Check for tire leaks or damage, and

check air hose for breaks and leaks at

fittings.

INFLATOR FEELS HOT OR RUNS

SLOWLY

• Unit may have overheated. Shut the unit

off and allow to cool for 20-25 minutes.

• NEVER use this inflator for more than

10 minutes continuously.

• Voltage may be too low. Check

condition of vehicle battery.