DSG Technology AA9604 Manual de operação - Página 8
Procurar online ou descarregar pdf Manual de operação para Correio de voz DSG Technology AA9604. DSG Technology AA9604 20 páginas. Auto attendant
8
Chapter 2 Installation
2-1 Installation Procedures
This chapter tells you how to install AA9604 Auto Attendant. To make the install
process easier and more efficient, we recommend reading the entire chapter from
start to end, following all the steps.
1.
Plug the factory-supplied 110V~220V/12V power adapter into power jack on
the rear panel of the system, and the 2-prong of the adapter into a power
outlet. (As shown in Figure 2-1) The power indicator on the front panel will
be lit.
2.
Plug one ends of the two factory-supplied telephone lines to the RJ-11 jack
labeled LINE1, LINE2, LINE3 and LINE4 on the rear panel, and the other
ends of the telephone lines to the appointed extensions of the PBX. (As
shown in Figure 2-1)
3.
(Optional) The system provides an external DC 12V battery connector. As
shown in Figure 2-1, connect one end of battery DC 12 volts wires to the
DC12V socket, and the other end to a battery. Please beware of the current
polarity (positive inside, negative outside) when connecting the battery.
When power failure occurs, the battery should supply the power
automatically, to maintain the operation of the system.
4.
Make sure the SECURITY/NORMAL switch on the front panel is in upper
position (NORMAL mode) before program the system. You will not be able
to enter the programming mode if the switch is in SECURITY mode.
Figure 1: The System Installation Layout
2-2 Precaution
AA9604 is capable of linking to all kinds of PBX. Please read the following before
you start.