DT SWISS 240 OVERSIZE Manual técnico - Página 12

Procurar online ou descarregar pdf Manual técnico para Acessórios para bicicletas DT SWISS 240 OVERSIZE. DT SWISS 240 OVERSIZE 14 páginas.

14. Check the bearing.

→ The hub must turn smoothly.

→ The hub must not have axial play.

15. If necessary, drive in the bearing on the non drive

side or loosen the bearing.

16. Repeat previous steps until the hub is turning

smoothly.

3.7 PUTTING ON THE END CAPS

1. Grease the bearings and the inner surface of both

end caps.

2. Screw on both end caps by hand.

3. Tighten the end caps with a suitable tool to 15

Nm.

→ 20 mm, 15 mm and 9 mm end caps: 22 mm

wrench

→ QR end caps: 5 mm hex key

Closing Steps:

Mount the brake rotor

Link