Abstract Data Event Boss ADE-33 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo Abstract Data Event Boss ADE-33. Abstract Data Event Boss ADE-33 16 páginas. Rhythm and pattern creation and manipulation

Imprimir página
11) Global Mode 5: Phase
MODE OVERVIEW
The Phase mode allows a user to shift the starting point or adjust the 'mark/space' ratio of an input
Event to a later starting point or to a different ratio. This is all done via CV and depending on the
selected Local Mode - the starting point shift or the mark/space ratio change can be based on a
'musical' sub division, a percentage shift or a time-based delay in mS.
FIRST PATCH
• This mode works best with regular Event inputs like clocks - but will also work with patterns and
Event inputs with irregular timing.
• Start with some sort of mid-tempo clock or square-wave LFO and a manually adjustable CV source.
• For each selected Local Mode – as the CV value changes – the Output phase should also change.
INPUT TYPES
IN: GATE A1 & A2
IN: GATE B/CV
CV OPTIONS
Local
Global
LOCAL MODE 1: Quantised Shift
CV
Operation
LOCAL MODE 2: Percentage Shift
CV
Operation
LOCAL MODE 3: Short Shift
CV
Operation
LOCAL MODE 4: Long Shift
CV
Operation
LOCAL MODE 5: Quantised Mark/Space
CV
Operation
LOCAL MODE 6: Percentage Mark/Space
CV
Operation
© 2018 Abstract Data Ltd.
• Any Event type e.g. clock, gate, trigger, square-wave or PWM-type LFO.
• Any 0-5V CV type e.g. LFO, envelope generator or variable CV source.
• 0-5V CV at IN: GATE B/CV sets each mode's phase-offset or delay.
• Event at IN: MODE SELECT/RESET sets each mode's phase/cycle length.
• Mark/Time calculations are still taken from IN: GATE A1 & A2.
• 0-5V CV sets the phase shift <n> to a value of:
0 || 1/16 || 1/8 || 1/4 || 1/3 || 1/2 || 3/4 || 1.
• Phase-shifts an input Event by a sub-division of it's own tempo.
• 0-5V CV sets the phase shift value from 0-100%.
• Phase-shifts an input Event by a percentage of it's own tempo.
• 0-5V CV sets the phase shift value from 0-1600mS.
• Phase-shifts an input Event by a time in mS.
• 0-5V CV sets the phase shift value from 0-4800mS.
• Phase-shifts an input Event by a time in mS.
• 0-5V CV sets the phase shift <n> to a value of:
Pulse || 12.5/87.5 || 25/75 || 37.5/62.5 || 50/50 || 62.5/37.5 || 75/25 || 87.5/12.5.
• Adjusts the Mark/Space ratio of an input Event to become a sub-division
ratio of it's own tempo.
• 0-5V CV sets the Mark segment of the Mark/Space ratio from 0-100%.
• Adjusts the Mark/Space ratio of an input Event to become a percentage
ratio of it's own tempo.
Page 11 of 13
Version 1.0.1